Dantsin-Wyler BlueLevelFor the BlueLEVEL, BlueLEVEL BASIC and MINILEVEL NT measuring instrumentsare various horizontal and angular measuring bases available. Depending on themeasuring tasks, each of them has its specific advantages.Short description of the different options:• Horizontal measuring base, prismatic - for measurements on horizontal surfacesand shafts• Horizontal measuring base, with dust grooves - particularly suitable for flatnessmeasurements on granite, length 150 and longer with 2 through holesfor screwing-on• Angular base made of cast iron, horizontal and vertical flat - for measurementson horizontal and vertical surfaces as well as for measuring the rectangularityof a measuring object• Angular base made of cast iron, horizontal and vertical prismatic - formeasurementson h...
The sensors of the ZEROTRONIC-family have a digital inclination sensor and a digital data transmission. Working digitally, they provide the option to compensate for temperature changes and allow data communication over long distances without any loss of data. The combination of all these features ensures that theses sensors fulfil highest requirements regarding precision, resolution and temperatur stability. ZEROTRONIC SENSOR-GROUP ZEROTRONIC-sensors have established themselves in the market as the benchmark when it comes to high-precision inclination measurement in demanding applications. The ZERTRONIC family of sensors features the following characteristics: High resolution and high precision Excellent temperature stability Measuring ranges of ±0.5 to ±60 degrees Synchro...
The inclination measuring set BlueSYSTEM SIGMA is a continuous further enhancement of the well known and well established inclination measuring instruments MINILEVEL NT. A BlueSYSTEM SIGMA normally consists of two inclination measuring instruments BlueLEVEL and an indicating unit BlueMETER SIGMA. This we call an ENGINEER SET. Depending on the application the BlueMETER SIGMA can also be connected to a PC with evaluation software allowing the on-line evaluation and presentation of the measured values.The ENGINEER SET is the ideal tool for measuring flatness and machines underwork shop conditions. Furthermore, the ENGINEER SET can be used for anylevelling task or analysis of rotations. The ENGINEER SET is specifically adapted to the needs of the metrology specialist taking care of machine too...
Withthe introduction of the BlueLEVEL-2D WYLER AG is underlining again its leading position in the field of inclination measuring instruments: The new Blue-LEVEL-2D combines for the first time two high-precision inclination sensors in a compact housing together with an integrated graphical display! This opens new applications and facilitates the alignment of machines and tools substantially: Alignment of machines in 2 directions simultaneouslyAlignment of reference platesPitch and roll measurement on machinesAlignment of cranes, containers, trucks etc.Monitoring of cranes, containers, trucks etc. The inclination measuring instrument BlueLEVEL-2D has the following features: Rugged, rust-protected housing made of aluminiumHigh precision bases with three inserts made of sintered carbide Ø...
The compact inclination measuring instrument Clinotronic PLUS provides a measuring capacity of ±45 degrees. Four precisely machined exterior reference surfaces assure accuracy and repeatability of measurements in any quadrant. Selected by push-button, any units suitable for inclination measurement may be applied to the display. Even slope indication based on a relative base of selectable length is possible. Simple push-button operation automatically sets absolute as well as relative zero. The RS485 interface allows the connection to other WYLER instruments or directly to a PC using a special cable. All indicated values are computed prior to display, by interpolation of calibration values stored. If required, an integrated calibration mode may be actuated in order to replace the stored...
Dantsin-Wyler BlueClinoThe new BlueCLINO is based on the well-proven CLINO2000 and has the followingfeatures:• With radio data transmission.• Large and very easy-to-read color display• Various color profiles can be chosen• Various display methods such as bar graphs or spirit levels can be chosen• All current units can be indicated• High precision over the entire measuring range of ±10° or ±60° withintegrated temperature compensation• The internal software, together with a reversal measurement, a simple zerosetting• Rugged housing, with prismatic bases made of either aluminum hardanodized or cast iron, nickel plated• The base on the right hand side can be used as a measuring base as well• Built-in cross vial for easy alignment of the vertical axis in order to avoid“twist...
The two-dimensional inclination measurement sensors ZEROMATIC 2/1 and 2/2 are perfectly suited for any application where monitoring of the smallest changes in absolute inclinations over a longer period of time is required. The extremely high accuracy is achieved by measuring and compensating for any drift of the absolute „zero“ by applying an automatic reversal measurement at defined intervals.The ZEROMATIC 2/1 has one inclination sensor. Each reversal measurement will provide one set of precise and absolute inclination values in the X and Y axes.The ZEROMATIC 2/2 has two inclination sensors. It can therefore provide continuous values for the inclination in X and Y axes. At defined intervals it will perform a reversal measurement and compensate for any offset.Typical applications are:Moni...
Dantsin-Wyler BlueMETER SIGMABlueMETER SIGMA is a further enhancement of the well known BlueMETER, andhas been developed as an intelligent display unit for the electronic inclinationmeasuring instruments• BlueLEVEL• BlueCLINO and BlueCLINO High Precision• MINILEVEL NT and LEVELTRONIC NT (both by means of cables only)• CLINOTRONIC PLUS• ZEROMATIC• ZEROTRONIC-sensorsBesides the excellent measuring accuracy, the measuring instruments BlueLEVEL,BlueCLINO, CLINOTRONIC PLUS and ZEROTRONIC sensors supply a fully digitalsignal for transmitting these values over long distances without any loss of quality.BlueMETER SIGMA is• a display unitand• an interface between instrument and PC/laptopThe following new functions and features distinguish the BlueMETER SIGMAfrom the BlueMETER:• large and very easy-...
Battery powered electronic inclinometer with analog display on a built-in galvanometer. The remarkable stability of the zero-point makes this instrument particularly suitable for long-term measuring tasks and for adjustment or alignment works on large guideways. The nivelSWISS is mounted in a rugged body of carefully treated cast iron. It is available in two versions:nivelSWISS 50-H HORIZONTAL VERSIONwith a horizontal flat measuring base, equipped with slots for screwing onto special measuring bases (i.e. granite measuring bases) or on customers‘ own special measuring equipment. Mainly used for the adjustment or alignment of horizontal machines and for checking the flatness of machine tables and guideways.nivelSWISS 50-W ANGULAR VERSIONequipped with two prismatic measuring ba...
Theinclination measuring instrument nivelSWISS is well known and well established in the machine tool industry. nivelSWISS-D is the consequentfurther development of the classic nivelSWISS:Stable cast iron bodyErgonomic handle supporting accurate measurement even on vertical surfacesWell-proven measuring systemDigitaldisplay allowing the full utilization of the accuracy of the measuring system. Furthermore, the digital and back-lit display allows excellent readability even under difficult light conditionsThe display can be inclined to allow optimal readability from aboveSimpleintegration into WYLER measuring systems: nivelSWISS-D can be connectedto a PC/laptop with a USB cable. The instrument is powered from the USB-Port. The digital measuring data transmission allows evalution withLEVELS...
TheBlueSYSTEM BASIC forms part of the BlueSYSTEM family, the latest generation of electronic inclination measuring instruments and systems. BlueSYSTEM BASIC normally consists of one or two BlueLEVEL BASIC measuring instruments and a display unit BlueMETER BASIC. Depending on the application the BlueMETER BASIC can also be connected to a PC with evaluation software allowing the on-line evaluation and presentation of the measured values. This latest generation of high precision electronic inclination measuring instruments is specifically suitable for the precision measurement of smallest angles. Applications are therefore in particular the measurement of flatness of surface plates or the measurement of the geometry of machine tools. The sensor itself, the heart of every precision measuring i...