The inclination measuring set BlueSYSTEM SIGMA is a continuous further enhancement of the well known and well established inclination measuring instruments MINILEVEL NT. A BlueSYSTEM SIGMA normally consists of two inclination measuring instruments BlueLEVEL and an indicating unit BlueMETER SIGMA. This we call an ENGINEER SET. Depending on the application the BlueMETER SIGMA can also be connected to a PC with evaluation software allowing the on-line evaluation and presentation of the measured values.The ENGINEER SET is the ideal tool for measuring flatness and machines underwork shop conditions. Furthermore, the ENGINEER SET can be used for anylevelling task or analysis of rotations. The ENGINEER SET is specifically adapted to the needs of the metrology specialist taking care of machine too...
• Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected• Automatic wake-up by moving the electronic on his frame. (system S.I.S)• Sleeping mode after 20 min. of no use. (system S.I.S)• Position memorized in sleeping mode (system S.I.S), absolute system*• Maximum speed of displacement : 2.5 m/sec• Mechanical frame in stainless steel, hardened and ground• Thumb wheel on request (see accessories)• Great comfort of use thanks to its ergonomic frame
OPTICAL MEASUREMENT SYLVAC-SCAN F60LTFEATURES· Cost Savings at Every Turn: Our non-contact machine is designed for the measurement of threads, while preserving the integrity of your parts, eliminating the risk of damage during quality control. One of our machine can handle virtually all measurements on cylindrical parts up to 64mm wide and 500mm long. With a complete 2D part scan taking less than 3 seconds, you can reduce inspection time, minimize scrap, and increase overall productivity.· Intuitive Operation: Enjoy easy operation right at your workplace with the new touch screen control panel. The dynamic LED indicator and intuitive Reflex SCAN+ concept provide real-time feedback on the measured part’s status (GO/NG) and operator messages. No prior programming is required—just a...
OPTICAL MEASUREMENT SYLVAC-SCAN F60 Discover our optical machines SCAN F60(T) and SCAN F60L(T) incorporating the patented Reflex-Click technology for one click measurement of cylindrical parts without preprogramming. On our T models, you will find an exclusive helix tilting system, for more comprehensive thread measurements.FEATURESCost Savings at Every Turn: Our non-contact machine is designed for the measurement of threads, while preserving the integrity of your parts, eliminating the risk of damage during quality control. One of our machine can handle virtually all measurements on cylindrical parts up to 64mm wide and 300mm long. With a complete 2D part scan taking less than 3 seconds, you can reduce inspection time, minimize scrap, and increase overall productivity.Intuitive Operation...
Horizon CMMCNC CMMStarting The Linear Drive RevolutionThe Horizon CMM breaks new ground in design and innovation using frictionless linear drives, which are the key to its fast and exceptionally smooth motion.The granite table and granite Y-axis rail has been designed to take full advantage of the natural thermal density of this remarkable material. The Y-axis linear drive system has been positioned away from the Y-axis linear encoder so that the heat generated by the linear drive is absorbed by the granite without affecting metrology performance.Extending The Linear Drive HorizonDrawing upon the tremendous success of the Horizon, the Horizon L has a larger X-Y-Z axis travel whilst utilising the same frictionless linear drives.The entire design of the Horizon L has been optimised to take f...
High Precision Angular Positioning, Calibration and Geometry Inspection Ultra precise rotary tables intended for fine inspection, metrology and test applications.2 axis design for rotary tilting applications with self-locking worm gearing and a high accuracy angular encoder ensures sensitivity and fine positioning for metrology and precision testing.Measurement Capacity: • 360° Rotary and -10° to +180° tilting axis • Sizes Ø250mm, Ø300mm, and Ø400mm • Overall height 225mm (axis vertical)• Centreline height 342mm (axis horizontal) • Load capacities up to 175kgs • Load moment up to 300Nm • Powerful pneumatic clamps (optional) • Angular accuracy 2 arc seconds • Angular repeatability 0.5 arc seconds
ELOPREP 102 is an automatic and programmable electrolytic polishing and etching equipment for the preparation of metallographic specimens.• Fully automatic electrolytic polisher / etcher• Programmable with HMI touch screen controls• Automatic determination of polishing and etching voltage• Fast & effective polishing results• Highest safety standards• External Etching Unit• Ability to operate two Polishing & Etching unit from the same control unit• Suitable for both normal and low temperature electrolytic polishing
Sylvac Optical measurement• Horizontal SCAN machine allowing to measure in the same position as the parts have been produced• Robust construction with granite table for use in workshop or control laboratory• Concept Reflex SCAN patented for measuring cylindrical workpieces without preprogramming• Measurements performed in seconds by a single click• Load the part, click the button and you get all the main values directly!• Automatic recognition of recorded parts already measured• Easy daily calibration thanks to the integrated master• Quick return of investment
Dantsin HOMMEL-ETAMIC T8000 / C8000The PC-based T8000 R measuring instruments are designed for demanding tasks in professional roughness metrology. They meet international standards and are used both in production and in the measuring room. The design allows different levels of expansion of the measuring station configurations and offers upgrade .Highlights• high-precision traverse for skidless measurement• modular structure• PC-based evaluation unit• robust Gauss filter according to ISO/TS 16610-31• many speciapossibilities for topography and contour measurement. HOMMEL-ETAMIC T8000 Rat a glance• calculation of all common profile, roughness and waviness parameters (more than 90)• traverse length 120 mm for roughness and waviness measurement• also suitable for measurement positions wi...
Dantsin Werth TomoCheck® HA 200 Werth TomoCheck® HA 200Werth Multi-Sensor Coordinate Measuring Machines with X-Ray Computed TomographyDesignComputed tomography in an air bearing Multi-sensor CMM - complete 3D measurements with the highest precisionMax. part dimensionsØmax.= approx. 172 mm; Lmax.= approx. 357 mm (depending on the aspect ration of the components)ApplicationsMeasurement and digitizing of plastic, light metal, and graphite parts with Computed Tomography and Werth Multi-sensor system.
Werth Video-Check®-IPFixed bridge CMM« – highest precisionand flexibilityMultisensor coordinate measuring machine for fully automatic determination of threedimensional geometries.Modular structure of the system guarantees customized solutions for individualmeasuring tasks.High accurate measuring stage due to air bearing technology and fine grainedgranite.Distortion free telecentric optics for the image processing (by choice 0,2x–100x).Contour image processing for fullyautomatic measuring of basic and nongeometrical elements in incident and transmitted light.Integration of further sensor units to a complete a multi-sensor system providinghigher flexibility and measuring speed.Fast auto focus for Z-measurement.High flexibility by variable illumination devices.Fast CNC continuous-pa...