Werth Laser Line Probe LLP Laser Line Sensor for fast digitization of workpieces in the lower accuracy rangeThe LLP provides an extremely fast scanning of 3D workpiece surfaces with high point density. High measuring frequencies are obtained even on highly relfective and highly absorbent surfaces.
Description: SHAFT SPIRIT LEVEL 63 Execution: Horizontal spirit level with slot windows which enable the view on the vial from the side. Standard version with prismatic measuring base, not recessed in the middle part, according to Standards DIN877 + DIN2276/1 Options:Measuring base prismatic, with magnetic inserts Measuring base flat, without magnetic inserts The main vial being fixed in a special mounting device, the vial is absolutely free from any tensions Transversal vial with a sensitivity of 2-5 mm/m for easier handling of the level when measuring on horizontal shafts The prismatic bases are suitable for shaft diameters Ø 17 … Ø 80 mm Packed in a wooden storage case Function: The SHAFT SPIRIT LEVEL 63 is suitable for measurements on horizontal surfaces and shafts and, due t...
• Great measuring range (2 - 300 mm)• Blind bore measurement from 2 to 6 mm and from 12.5 mm• Fixed anvils• UKAS certificate included with all rings• UKAS certificate included with each instrument• Manufactured according to DIN863• Memorization of 3 ring gauges values• Water and coolant resistant, protection rating IP65 according to IEC 60529• Programmable by PC• Also available in version Holomatic IP65 or BT IP67• Battery life: 3’300 hours continuous• S_Connect Power: RS232 / USB / Digimatic / Wireless• Special applications on request (see X_treme special applications... )
Werth 3D Fiber Probe WFP High precision three dimensional measurementWith the new 3D Werth Fiber Probe (WFP), the range of applications of the proven Werth Fiber Probe technology has expanded to additional measurement tasks, particularly in 3D. It is well suited for tactile measurement of three dimensional microstructures. Typical applications include measuring tools, watch components, fuel injector nozzles and micromechanical components. The low probing forces make the 3D WFP suitable for the (nearly non-contact) measurement of sensitive components, such as lens surfaces or elastic components made of rubber or plastic. Extremely low probing forces of less than one thousandth of a Newton are possible. Probing spheres with a diameter as small as 20µm are available. The 3D WFP is c...
Werth Chromatic Focus Probe CFP Chromatic focus sensor for highly accurate non-contact measurement on reflecting surfaces (mirrors, lenses, etc.)The CFP is used for the measurement of highly reflective, absorbent, and transparent materials. The CFP is especially suited for the fast and precise measurement of lens surfaces.
Description:SCREW-ON SPIRIT LEVEL 66 Execution:The vial of the SCREW-ON SPIRIT LEVEL 66 is firmly sealed in a stable steel body of cubic shape, outside gun-bluedThe SCREW-ON SPIRIT LEVEL 66, according to DIN877 + DIN2276/1, is available in various lengths and sensitivities (see specifications)The SCREW-ON SPIRIT LEVEL 66 is equipped with 2 through holes for mounting on a measuring objectWithout caseFunction:The SCREW-ON SPIRIT LEVEL 66 is specially designed for measurements on flat surfaces of machines, apparatus, etc. as well as for permanent mounting on measuring objectsSensitivity:See SpecificationsCalibration Certificate: The SCREW-ON SPIRIT LEVEL 66 can be delivered with an internationally recognised Calibration Certificate against a surcharge
• Capacitive absolute measuring probes, plunger type• Resolution 0.0001 mm• Measuring range from 5 to 25 mm• Plain bearing or ball bearing, integrated vacuum lifter on P5• Compatible with all Sylvac digital units• Excellent linearity• Interchangeable cables on most types
Description:SCREW-ON SPIRIT LEVEL 66 Execution:Standard version with prismatic measuring base, without magnetic inserts, according to DIN877 + DIN2276/1Alternatively the HORIZONTAL SPIRIT LEVEL 69 is available with the following options:Measuring base prismatic with magnetic insertsMeasuring base flat without magnetic insertsMeasuring base flat with magnetic insertsThe vial in the HORIZONTAL SPIRIT LEVEL 69 is firmly sealed in a stable cast iron profileThe HORIZONTAL SPIRIT LEVEL 69 is available in various lengths and sensitivities (see table below)The prismatic bases are suitable for shaft diameters Ø 17 … Ø 80mmWithout caseFunction:The HORIZONTAL SPIRIT LEVEL 69 is particularly suitable for measurements on flat surfaces and shafts (when equipped with prismatic base) on mac...
• Inductive measuring probes specially designed for measurement by comparison• Available in 2 versions: spring push and pneumatic push• Long life precision bearing guidance (tested up to 13 million cycles)• Resolution • Repeatability 0.15 μm• Measuring range +/- 2mm and +/- 5 mm• Compatible with D300SV2 and D400S units through M-Bus multiplexer units• High data speed• Operating temperature +10 to +80°C• IP65 protected
New probe P25DWe are thrilled to announce the launch of our latest instrument, the S_Probe P25D, and we are excited to share this innovation with you.This probe with patented absolute inductive measuring system has been specifically engineered for workshop use and provides exceptional precision across its entire measuring range.Direct Digital Output: Simplify your data acquisition process with the P25D's direct digital output capability. By leveraging our cutting-edge Sylcom software, customers can now connect the probe directly to their computer with a M8, USB or Open connector, eliminating the need for a separate display unit. This streamlined workflow enhances efficiency and the space needed on the quality control table.Compatibility and High Precision: The P25D is designed to excel...
Description:CIRCULAR SPIRIT LEVEL 72 Execution:CIRCULAR SPIRIT LEVELS are available dimensions (see specifications)Function:CIRCULAR SPIRIT LEVELS are suitable for erection and levelling of machines or apparatus
• Digital multifunctional unit with 7’’ touch screen display• Multi-brands compatible through M-BUS multiplexers (possibility to mix the brands)• Designed for multi-gauging applications• Up to 99 input (probes, instruments, I/O) through M-BUS multiplexers• Automatic detection of connected instruments• Storage of up to 128 different parts configurations• Up to 30’000 measurements can be saved by configuration• Display of up to 32 channels simultaneously (on the same screen)• Single or multi-gauging display mode• SPC functions (run chart, pareto, histogram with Gauss curve, etc.)• PLC functions and PLC communication protocols• Formula editor, free combination between all instruments connected to the M-BUS• Configurable by PC• Ethernet connexion• Footpedal input• User friendly interface• Very...