Description:CROSS SPIRIT LEVEL 78 Execution:The CROSS SPIRIT LEVEL 78, according to DIN877 and DIN2276/1, is equipped with two measuring vials arranged in crosswise direction and can be screwed onto a measuring object. The measuring base is hand scrapedThe CROSS SPIRIT LEVEL 78 is available in various dimensions and sensitivities (see table below)178-080-123-xxx: without wooden case178-150-123-xxx: with wooden caseFunction:The CROSS SPIRIT LEVEL 78 is specially designed for the simultaneous measuring or levelling of surfaces on machines, apparatus, etc.The main advantage of this spirit level is, that the inclination of both axis (X and Y axes) is visualised at the same time. This enables a quick levelling of a measuring object in a very easy waySensitivity:See table in Specificat...
• Digital display with 8.5’’ touchscreen• Available in 3 versions : - 6 USB and M-Bus - 6 USB and 2 Sylvac capacitive probe input - 6 USB and 4 Sylvac capacitive probe input• Automatic detection of connected instruments• New CPU unit (5 times faster that previous version)• OS based on Windows 7 embedded• Display and page setting fully configurable (up to 8 channels per page, up to 64 pages)• Memorizing of setups and values• RJ-45 Ethernet connector• General or individual Preset• Math functions for each channel• Numeric, analog and statistic display• Compatible with BLUETOOTH Smart instruments (USB dongle is required)
Description:MAGNETIC ANGLE SPIRIT LEVEL 47 Execution:Standard version with a prismatic vertical measuring base of 100 mm, equipped with magnetic inserts, according to Standards DIN877 + DIN2276/1The vial has a sensitivity of 0.30 mm/mThe prismatic base is suitable for shaft diameters Ø 17 … Ø 80 mmThe vial is protected by a transparent Plexiglas tube, which also eliminates the transfer and influence of the body temperaturePacked in a wooden storage caseFunction:The MAGNETIC ANGLE SPIRIT LEVEL 47 is suitable for measurements on vertical surfaces and shaftsThe magnetic inserts assure an excellent adhesion to vertical shafts and surfacesDimensions:Base length vertical 100 mmLength horizontal 100 mm (tube end = 100 mm from flat base)Width 30 mmWeight:Net weight (without case) 0....
• Digital unit with 1 probe input (8 channels extension)• Resolution up to 0.0001 mm• Data output RS232C• Opto-coupled output (command signals)• Possibility of probes pneumatic lifting• Selection of measuring direction• Memorization of programs• Possibility of increase in the precision by calibrating the unit with the probe• Powered by a charging unit
Description:UNIVERSAL ANGLE SPIRIT LEVEL 64 Execution:Angular spirit level with removable tubular spirit level with a prismatic vertical measuring base of 150mm, according to Standards DIN877 + DIN2276/1The prismatic base is suitable for shaft diameters Ø 19 … Ø 108mmThe vial has a sensitivity of 0.50 mm/mPrecision: 0.50 mm/mTransversal vial with a sensitivity of 2-5 mm/m for easier handling of the level when measuring in the verticalPacked in a wooden storage caseFunction:The UNIVERSAL ANGLE SPIRIT LEVEL 64 is particularly suitable for measurements on vertical surfaces and shaftsThe tubular level can, however, also be used for measuring on flat surfacesDimensions:Length of vertical base 150mmLength with tubular level 160mm (tube end = 160mm from flat base)Width 40mmFlat fa...
• 4’’3 touch screen display• Available in 3 versions:- D70S for Sylvac capacitive probes- D70I for Sylvac inductive probes (also compatible with Tesa, Mahr and Peter Hirt probes)- D70H for Heidenhain Spectro/Metro probes (Mitutoyo and Magescale probes with adapter)• All versions with 2 probe inputs• Display resolution selectable up to 0.00001 mm• Simple or double display with bargraph or needle• Different possibilities of probe’s combination : (C1, C2, C1-C2 ...)• Direct measurement or Min, Max, Average, Max-Min...• User friendly interface• Very robust construction• USB connection «Keyboard», the easiest way to transfer data to PC• No driver, no software to be installed. Works everywhere (Excel, etc.)• Powered by the computer when connected by USB cable
• Measuring bench with great flexibility of use• Tailstock adjustable in X axis (and in Z, depends on model)• Accurate micrometer screw for pre-positioning• Compatibility with Sylvac anvils (Ø1.5mm) and Cary type anvils• Several accessories available• 2 models : Integrated P10 capacitive probe (VP) or free use with indicator (VS)
• The bench tables PS16 VS/VP are designed to check dimensions up to 50 mm• The VS versions have an integrated display as well as an opto - RS232 output•The VP versions have an integrated P25 or P50 Sylvac probe. The measured value will be displayed on a Sylvac D50S, D80S and D100S display unit• These bench tables can be equipped with different kindof tables to fit your needs as well as with several types of anvils of any shapes• A ball bearing, an adjustable and reversible measuring force, as well as many other features and accessories make these tables amust for your workshop or your inspection room• Adjustable measuring force• Data output Opto-RS/ USB• Standard measuring anvils Ø 6.5 mm
• Brand new PS16 bench series with modern design and Bluetooth® transmission integrated• The bench tables PS16 VS/VP are designed to check dimensions up to 50 mm (depends on model)•These bench tables can be equipped with different kind of tables to fityour needs as well as with several types of anvils of any shapes• Aball bearing, an adjustable and reversible measuring force, as well as many other features and accessories make these tables a must for your workshop or your inspection room• Adjustable measuring force• Data output Bluetooth® or USB• Standard measuring anvils Ø1.5mm• Others models on demand
• Small horizontal bench table designed to easily and quickly check small parts up to 10 mm.• Measuring spindle guided by linear ball bearing.•The measured value will be displayed either by a Sylvac digital dial gauge range 12.5mm, up to 0.1 μm resolution or by a Sylvac measuring probe P10 (P10L) linked to a digital display unit. Using a pair display unit / measuring probe an overall accuracy of 0.6 μm and a repeatabilityof 0.2 μm can be reached.• This bench table can be equipped with different kind of tables as well as with several types of anvils of any shapes.• Standard spindle Ø 1.5 mm (908.2175)• Compatible with Sylvac Ø 1.5 mm and Cary type spindle.
• Multiplexer units allowing to connect different kind and brands of instruments to our D300S V2 or D400S display units or to a PC• Possibility to connect and mix different brands together• RS485 based protocol• The different units can be mounted on a DIN rail• Robust construction
• Multiplexing unit with 2 or 4 inputs for Sylvac probes P2 à P50• Dynamic measurement (10 to 20 meas./Sec. according to resolution)• Perfect solution for multi-gauging system• Analog output for PLC connection• Standalone use possible